Filter
Top Products
113
Controls in detail
Instrument cluster
̄ Instrument cluster
For a full view illustration of the instrument
cluster, see (
୴ page 28).
1 Reset button
The instrument cluster is activated when
you
ț open a door
ț switch on the ignition
ț press the reset button 1
ț switch on exterior lamps
Opening a door will activate the instrument
cluster only for about 30 seconds.
You can change the instrument cluster
settings in the Instrument cluster submenu
of the control system (
୴ page 129).
Instrument cluster illumination
Use the reset button 1 to adjust the illu-
mination brightness for the instrument
cluster and the switches on the center con-
sole.
To brighten illumination
̈ Turn the reset button 1 clockwise.
The instrument cluster illumination will
brighten.
To dim illumination
̈ Turn the reset button 1 counterclock-
wise.
The instrument cluster illumination will
dim.
i
The instrument cluster illumination is
dimmed or brightened to suit ambient
light conditions.