Filter
Top Products
225
Controls in detail
Useful features
Slipping dust cover on/off
̈ Place the rolled-up dust cover with its
dark grey side facing downwards on
the vehicle roof.
Make sure the FRONT label is facing to-
wards the front of the vehicle.
̈ Roll the side that is labelled FRONT
over the hood.
̈ Roll the rear part over the tail end of
the vehicle.
̈ Unfold the dust cover.
̈ On the rear right, pull down the dust
cover below the bumper.
̈ Pull down the dust cover on the right
side of the vehicle.
̈ On the front right, pull down the dust
cover below the bumper.
̈ On the rear left, pull down the dust cov-
er below the bumper.
̈ Pull down the dust cover on the left
side of the vehicle.
̈ On the front left, pull down the dust
cover below the bumper.
i
You can now apply the anti-theft de-
vice, see “Anti-theft device for dust
cover” (
୴ page 226). ୴୴