Filter
Top Products
59
Getting started
Parking and locking
̄ Parking and locking
You have now completed your first drive.
You have properly stopped and parked
your vehicle. End your drive as follows.
Parking brake
1 Parking brake lever
2 Release button
̈ Pull up parking brake lever 1 firmly.
When the ignition is switched on or the
engine is running, the brake warning
lamp ; (USA only) or 3 (Canada
only) in the speedometer dial comes
on.
Warning! G
Vehicles with manual transmission:
Wait until the vehicle is stationary before re-
moving the SmartKey from the starter
switch. The vehicle cannot be steered when
the SmartKey is removed.
Warning! G
With the engine not running, there is no
power assistance for the brake and steering
system. In this case, it is important to keep
in mind that a considerably higher degree of
effort is necessary to brake and steer the ve-
hicle.
Warning! G
Do not park this vehicle in areas where com-
bustible materials such as grass, hay or
leaves can come into contact with the hot
exhaust system, as these materials could be
ignited and cause a vehicle fire.
To reduce the risk of personal injury as a re-
sult of vehicle movement, before turning off
the engine and leaving the vehicle always:
ț Keep right foot on brake pedal.
ț Pull up the parking brake lever firmly.
ț Move the gear selector lever* to
position
P (manual transmission: first or
reverse gear).
ț Slowly release brake pedal.
ț When parked on an incline, turn front
wheels towards the road curb.
ț Turn the SmartKey in the starter switch
to position
0 and remove the SmartKey
from the starter switch.
ț Take the SmartKey and lock vehicle
when leaving.