Filter
Top Products
40
Getting started
Adjusting
Seat height
̈ Pull or push handle 2 up or down and
adjust the seat height until your legs
are slightly supported.
Backrest tilt
̈ Pull handle 3 and adjust the backrest
until your arms are slightly angled
when holding the steering wheel.
̈ Release handle 3 when the desired
backrest tilt is reached.
When you hear an audible click, the
backrest is again fixed into place.
For more information, see “Seats”
(
୴ page 104).
Power seat* adjustment
The seat adjustment switches are located
on the outer side of each seat.
1 Seat fore and aft adjustment
2 Seat height
3 Backrest tilt
4 Seat cushion tilt
̈ Switch on the ignition (୴ page 36).
or
̈ Open the respective door.
Seat fore and aft adjustment
̈ Press the horizontal switch forward or
backward in direction of arrow 1.
Adjust seat to a comfortable seating
position that still allows you to reach
the accelerator/brake pedal safely.
The position should be as far rearward
as possible, consistent with ability to
properly operate controls.
Seat height
̈ Press the horizontal switch up or down
in direction of arrow 2 and adjust the
seat height until your legs are slightly
supported.
i
The memory function* (୴ page 107)
lets you store the settings for power
seats*, steering wheel adjustment
(electrical)*, and exterior rear view
mirrors.