Filter
Top Products
410
Practical hints
Flat tire
̈ Screw the air pump’s air hose 5 onto
flange 6 of the TIREFIT container.
̈ Stick TIREFIT container 1 upside
down into notch 3 of the electric air
pump.
7 Tire valve
8 Electric air pump switch
9 Pressure gauge and vent screw
a Filler hose
̈ Unscrew the valve cap from tire
valve 7.
̈ Screw filler hose a onto tire valve 7.
̈ Close vent screw 9 on air hose 4.
̈ Insert electrical plug 4 into the power
outlet in the passenger footwell
(
୴ page 271).
̈ Turn the SmartKey in the starter switch
to position 1 (
୴ page 36).
̈ Press I on electric air pump switch 8.
The electric air pump should now
switch on and inflate the tire.
After 5 minutes, the pressure gauge must
display at least 26 psi (1.8 bar). The air
hose can become hot during inflation.
Please exercise appropriate caution.
̈ If this tire inflation pressure is not at-
tained, turn off the electric air pump,
detach the filler hose from the tire
valve, and drive vehicle back and forth
very slowly approximately 30 ft (10 m).
This serves to better distribute the
TIREFIT sealant material inside the tire.
̈ Unscrew the air pump’s air hose 5
from flange 6 of the TIREFIT contain-
er.
̈ Screw air hose 5 onto tire valve 7.
̈ Inflate the tire again.
Warning! G
Observe safety instructions on air pump la-
bel.
!
The cigarette lighter (୴ page 270) is
not designed for use with the electric
air pump. Use the power outlet in the
passenger footwell (
୴ page 271) for
electric air pump operation.
!
Do not operate the electric air pump
longer than 6 minutes without interrup-
tion. Otherwise it may overheat.
You may operate the air pump again af-
ter it has cooled off.
୴୴