Filter
Top Products
310
Operation
Engine compartment
Other display messages
If the ignition is not switched on, the fol-
lowing message will appear:
Turn on ignition
to see engine oil level
̈ Switch on the ignition (୴ page 36).
If you see the message:
Observe waiting time
̈ If engine is at operating temperature,
wait 5 minutes before repeating check
procedure.
̈ If engine is not at operating tempera-
ture yet, you must wait 30 minutes
before checking oil.
If you see the message:
Engine oil level
Not when engine on
̈ Turn off the engine.
̈ If the engine is at operating tempera-
ture, wait 5 minutes before checking
oil.
̈ If the engine is not at operating
temperature yet, you must wait
30 minutes before checking oil.
If there is excess engine oil with the engine
at normal operating temperature, the
following message will appear:
Engine oil level
Reduce oil level
̈ Have excess oil siphoned or drained
off. Contact an authorized
Mercedes-Benz Center.
For more information on messages in the
display concerning engine oil, see the
“Practical hints” section (
୴ page 368).
i
If you want to interrupt the checking
procedure, press button k or j
on the multifunction steering wheel
(
୴ page 124).
!
Excess oil must be siphoned or drained
off. It could cause damage to the
engine and catalytic converter not
covered by the Mercedes-Benz Limited
Warranty.