Filter
Top Products
326
Practical hints
What to do if …
Display symbol Display messages Possible cause Possible solution
2
Brake wear
Visit workshop!
The brake pads have reached their wear
limit.
̈ Brake pad thickness must be visually
inspected at the intervals specified in
the Service Booklet.
̈ Have the brake pads replaced as soon
as possible.
T
Brake malfunction
Stop vehicle
The SBC brake system is in the emergen-
cy operation mode. Considerably greater
brake pedal force is required and the
stopping distance is increased.
Do not exceed a speed of 55 mph
(90 km/h).
̈ Do not drive any further.
̈ Stop the vehicle and notify an autho-
rized Mercedes-Benz Center.
̈ Significantly greater force must be ap-
plied to the brake pedal.
̈ Call for Roadside Assistance.
Except Canada:
;
Canada only:
3
Reduced
braking effect
Start engine!
Longer
stopping dist.
Start engine!
The battery has insufficient voltage and
cannot supply sufficient power to the
SBC brake system.
̈ Start the engine.
The message disappears when suffi-
cient voltage is available