Filter
Top Products
323
Practical hints
What to do if …
Display Display message Possible cause Possible solution
ESP not available!
See Operator’s Manual
The ESP is deactivated because of a
malfunction or interrupted power
supply.
The SBC brake system is still func-
tioning normally.
̈ Synchronize the ESP. With the vehicle sta-
tionary, turn the steering wheel completely
to the left and then to the right to synchro-
nize the ESP.
If the ESP message does not go out:
̈ Continue driving with added caution.
̈ Visit an authorized Mercedes-Benz Center
as soon as possible.
Failure to follow these instructions increases
the risk of accident.
P Gear selector lever in P
You have turned off the engine with
the KEYLESS-GO* start/stop but-
ton* and opened the driver’s door.
̈ Place the gear selector lever in position P.
P/N Shift to N or P
You have attempted to start the en-
gine with the KEYLESS-GO*
start/stop button while the gear se-
lector lever was in position R or D.
̈ Place the gear selector lever in position P or
N.