Filter
Top Products
117
Controls in detail
Memory function
The memory switch is located on the door.
M Memory button
1, 2, 3 Stored positions
̈ Be sure the ignition is switched on or
the relevant door is open and the
SmartKey is inserted in the starter
switch.
Storing positions in memory
̈ Adjust the seats, steering wheel and
exterior rear view mirrors to the de-
sired position (
୴ page 34).
̈ Press memory button M.
̈ Release memory button and press
stored position button 1, 2 or 3 within
three seconds.
All the settings are stored at the select-
ed position.
Recalling positions from memory
̈ On memory button, press and hold
stored position button 1, 2 or 3 until
the seat, steering wheel and exterior
rear view mirrors have fully moved to
the stored positions.
i
Releasing the button immediately
stops movement to the stored posi-
tions.
Warning! G
Do not operate the power seats using the
memory button if the seat backrest is in an
excessively reclined position. Doing so
could cause damage to front or rear seats.
First move backrest to an upright position.