Filter
Top Products
293
Operation
Tires and wheels
̈ Press the reset button (୴ page 22).
The following message will appear in
the multifunction display:
Check current tire pres.?
̈ Press the æ button.
The following message will appear in
the multifunction display field:
Tire pres. monitor acitvated
The tire inflation pressure monitor will
now monitor the tire inflation pressure
values of all four tires.
The following message will appear in
the multifunction display field:
Tire pres. monitor
Pres. display after driving a few
mins. Reactivate using R button
This display appears until the individual
inflation pressure values are matched
with the tires. The individual values are
then displayed (
୴ page 340).
If you wish to cancel activation:
̈ Press the ç button.
If the following message appears in the
multifunction display field:
Reactivate tire
Pres. monitor
or
Tire pres.
Check tires!
̈ Check the tire inflation pressures and
correct them if necessary.
̈ Reactivate the tire inflation pressure
monitor.
Rotating wheels
On vehicles with the same wheel size all
around, wheels can be rotated every 3000
to 6000 miles (5000 to 10000 km), or
sooner if necessary, according to the de-
gree of tire wear. The same direction of tire
rotation must be retained.
Rotate the wheels before the characteris-
tic tire wear pattern becomes visible
(shoulder wear on front wheels and tread
center wear on rear wheels).
Thoroughly clean the inner side of the
wheels after each rotation. Check and en-
sure proper tire inflation pressure.
Warning! G
Rotate front and rear wheels only if they are
of the same size.