Filter
Top Products
135
Controls in detail
Control system
̈ Move the selection marker with
the æ or ç button to the
CONVENIENCE
submenu.
̈ Press button j or k repeatedly
until you see this message in the
display:
EASY-ENTRY FEATURE
ACTIVATE
.
The selection marker is on the current
setting.
̈ Press æ or ç to change the
easy-entry/exit setting.
The following settings are available for
the easy-entry/exit feature:
Setting key-dependency
Use this function to set whether the
memory settings for the seats, the steering
wheel and the mirrors should be stored
separately for each SmartKey (
୴ page 99).
̈ Move the selection marker with
the æ or ç button to the
CONVENIENCE
submenu.
̈ Press button j or k repeatedly
until you see this message in the
display:
SETTINGS KEY-DEPENDENT
.
The selection marker is on the current
setting.
̈ Press æ or ç to set
key-dependency to
ON
or
OFF
.
OFF
The
easy-entry/exit
feature is
deactivated
STEERING COLUMN
Only the
steering column
is moved
STEERING COLUMN +
SEAT
Both the
steering column
and the seat are
moved