Filter
Top Products
100
Controls in detail
Memory function*
The memory button and stored position
button are located on the door.
1 Memory button
2 Stored position button
̈ Make sure the ignition is switched on
or the relevant door is open and the
SmartKey is inserted in the starter
switch.
Storing positions into memory
̈ Adjust the seats, steering wheel and
rear view mirrors to the desired posi-
tion (
୴ page 32).
̈ Turn button 2 to selected memory
position.
̈ Press memory button 1.
̈ Release memory button and push
button 2 within three seconds.
All the settings are stored at the
selected position.
Recalling positions from memory
̈ Turn button 2 to selected memory
position.
̈ Press and hold button 2 until the seat,
steering wheel and rear view mirrors
have fully moved to the stored posi-
tions.
i
Releasing the button immediately
stops movement to the stored posi-
tions.
Warning! G
Do not operate the power seats using the
memory button if the seat backrest is in an
excessively reclined position. Doing so
could cause damage to front or rear seats.
First move backrest to an upright position.