Filter
Top Products
47
Getting started
Driving
Turn signals and high beam
The combination switch is on the left of the
steering column.
Combination switch
1 Turn signals, right
2 Turn signals, left
̈ Press the combination switch up 1 or
down 2.
High beam
̈ Push the combination switch forward.
The high beam headlights are switched
on.
The high beam symbol
A in the
tachometer lights up.
More information can be found in the
"Controls in detail" section (
୴ page 108).
Windshield wipers
The combination switch is on the left of the
steering column.
Combination switch
1 Single wipe
2 Switching on windshield wipers
̈ Make sure that the ignition is switched
on.
i
To signal minor directional changes,
move combination switch to point of
resistance only and release. The turn
signal blinks three times.