Filter
Top Products
135
Controls in detail
Control system
The following settings are available for the
easy-entry/exit feature:
Setting key dependency
Use this function to set whether the mem-
ory settings for the seats, the steering
wheel and the mirrors should be stored
separately for each key (
୴ page 102).
̈ Move the selection marker with
the
æ or ç button to
the
Convenience
submenu.
̈ Press button j or k repeatedly
until you see this message in the dis-
play:
Key-dependent
.
The selection marker is on the current
setting.
̈ Press æ or ç to set key depen-
dency to
on
or
off
.
Setting parking position for exterior rear
view mirror
Use the
Mirror adjustment parking aid
function to select whether the passen-
ger-side exterior rear view mirror should be
turned downward during parking maneu-
vers (when reverse gear is engaged).
For information about activating the park-
ing position, see “Parking position”
(
୴ page 150).
The exterior rear view mirror will return to
its previous position when you
ț shift out of reverse (after 10 seconds)
ț exceed a speed of 6 mph (10 km/h),
regardless of which gear is engaged
ț press the driver’s side mirror button
(immediately)
̈ Move the selection marker with
the
æ or ç button to
the
Convenience
submenu.
̈ Press button j or k repeatedly
until you see this message in the dis-
play:
Mirror adjustment parking aid
.
The selection marker is on the current
setting.
̈ Press æ or ç to switch function
on
or
off
.
off
The easy-entry/ex-
it feature is deacti-
vated.
Steering col.
Only the steering
column is moved.
Steer. col. + seat
Both the steering
column and the
seat are moved.