Filter
Top Products
322
Practical hints
Replacing bulbs
Replacing bulbs for rear lamps
Tail lamp assemblies
1 Brake lamp
2 Turn signal lamp
3 Backup lamp
4 Standing and side marker lamp
5 Rear fog lamp (driver’s side)/tail
̈ Switch off the lights.
̈ Open trunk.
̈ Swing the trim panel covering the cor-
responding rear lights to the side.
̈ Squeeze tabs together and remove the
bulb holder with the bulb.
̈ Twist bulb counterclockwise and pull
out of bulb holder.
̈ Insert new bulb into the holder and turn
it clockwise.
̈ Reinstall bulb holder. The tabs must au-
dibly click.
̈ Close trim panel.
̈ Place the housing cover back on so
that its tabs click in place.
License plate lamp
1 Screws
̈ Switch off the lights.
̈ Loosen both screws 1 and remove
lamp.
̈ Replace the tubular lamp and reinstall
lamp.
̈ Retighten the screws.