Filter
Top Products
129
Controls in detail
Control system
Set time (minutes)
̈ Move the selection marker with
the
æ or ç button to the
Time
submenu.
̈ Press button j or k repeatedly
until you see this message in the dis-
play:
Clock, minutes
.
The selection marker is on the minute
setting.
̈ Press æ or ç to set the minutes.
̈ Press the reset knob in the instrument
cluster to confirm.
The minutes are set and stored.
Lighting submenu
Access the
Lighting
submenu via the
Set-
tings
menu. Use the
Lighting
submenu
to change the lamp and lighting settings on
your vehicle. The following functions are
available:
Setting daytime running lamp mode
(USA only)
̈ Move the selection marker with
the
æ or ç button to the
Light-
ing
submenu.
̈ Press button j or k repeatedly
until you see this message in the dis-
play:
Lamp circuit headlamp
.
The selection marker is on the current
setting.
̈ Press æ or ç to select
manual
or
daytime running lamp (
constant
)
mode. This function is not available in
countries where daytime running
lamps are mandatory.
Function Page
Set daytime running lamp mode
(USA only)
see
below
Set locator lighting 130
Exterior lamps delayed
switch-off
131
Interior lighting delayed
switch-off
132