Filter
Top Products
172
Controls in detail
Audio system
Direct frequency input (AM and FM only)
Select the desired frequency band.
̈ Press the “ button.
̈ Enter the desired frequency with the
buttons 1 to 0.
Manual tuning
̈ Select the desired band.
̈ Press and hold either the d or c
button until the desired frequency is
reached.
Step-by-step station tuning takes place
in ascending or descending order of
frequency. The first three tuning steps
will take place without muting. After-
ward, the radio will be muted and
high-speed tuning will take place until
the button is released.
Automatic seek tuning
̈ Select the desired frequency band.
̈ Press either the f or e button.
The radio will tune to the next receiv-
able station at a higher or lower fre-
quency.
i
You can only enter frequencies within
the respective waveband.
If a button is not pressed within four
seconds, the radio will return to the last
tuned station.