Filter
Top Products
39
Getting started
Adjusting
Exterior rear view mirror The buttons are located above the exterior
lamp switch.
1 Driver’s side mirror
2 Adjustment button
3 Passenger side mirror
̈ Make sure that the ignition is switched
on.
All the lights in the instrument cluster
light up.
̈ Press button 1 for the left mirror or but-
ton 3 for the right mirror.
̈ Push adjustment button 2, up, down,
left or right according to the setting de-
sired.
More information can be found in the
“Controls in detail” section (
୴ page 141).
Warning! G
Exercise care when using the passenger
side exterior rear view mirror. The mirror
surface is convex (outwardly curved surface
for a wider field of view). Objects in mirror
are closer than they appear. Check your in-
side rear view mirror or glance over your
shoulder before changing lanes.
!
Electrolyte drops coming into contact
with the vehicle paint finish can only be
completely removed while in their liq-
uid state by applying plenty of water.
!
If an exterior rear view mirror housing
is forcibly pushed forward or rearward,
reposition it by applying firm pressure
until it snaps into place. The mirror
housing is now properly positioned and
you can adjust the mirror normally.
i
With the memory function*, you can
store seat positions together with set-
tings for the steering wheel and the ex-
terior rear view mirrors (
୴ page 95).
S203 MY03_A.book Page 39 Tuesday, January 28, 2003 2:22 PM