Filter
Top Products
185
Controls in detail
Power windows
Closing the windows
̈ Pull on switch.
The window will move upwards until
you release the switch.
If you pull and hold the switch up when
closing the window, and upward move-
ment of the window is blocked by some ob-
struction including but not limited to arms,
hands, fingers etc., the automatic reversal
will not operate.
Fully opening windows
̈ Press switch past resistance point and
release.
The window opens completely.
Fully closing windows
̈ Pull switch past resistance point and
release.
The window closes completely.
If the upward movement of the window is
blocked during the closing procedure, the
window will stop and open slightly.
Stopping windows
̈ Press or pull respective switch again.
Warning! G
Driver’s door only:
If within five seconds the switch 1 is again
pulled past the resistance point and re-
leased, the automatic reversal will not
operate.
i
You can also open or close the win-
dows using the:
ț SmartKey (summer opening/con-
venience feature), see below
ț O button in the control panel of
the climate control (
୴ page 145) or
automatic climate control
(
୴ page 153)
ț e button in the control panel of
the automatic climate control
(
୴ page 153)
S203 MY03_A.book Page 185 Tuesday, January 28, 2003 2:22 PM