Filter
Top Products
297
Practical hints
Replacing bulbs
Side marker lamp bulb
̈ Switch off the lights.
̈ Carefully slide lamp towards rear.
̈ Remove front end first.
̈ Twist bulb socket counterclockwise
and pull out.
̈ Pull bulb out of the bulb socket.
̈ Insert new bulb in socket.
̈ Reinstall bulb socket, push in and twist
clockwise.
̈ To reinstall lamp, set rear end in
bumper and let front end snap into
place.
Replacing bulbs for rear lamps
Tail lamp assemblies
̈ Open tailgate (୴ page 87).
̈ Switch off the lights.
̈ Press button 1 on the corresponding
side.
̈ Fold down trim panel 2.
̈ Squeeze tabs together 3.
̈ Remove bulb holder.
S203 MY03_A.book Page 297 Tuesday, January 28, 2003 2:22 PM