Filter
Top Products
192
Controls in detail
Driving systems
Setting stored speed (“Resume”
function)
̈ Briefly push the cruise control lever to
position 4.
The cruise control will resume the last
previously set speed.
̈ Remove your foot from the accelerator
pedal.
Setting a higher speed
̈ Lift the cruise control lever to
position 1 and hold it up until the de-
sired speed is reached.
̈ Release the cruise control lever.
The new speed is set.
Setting a lower speed
̈ Depress the cruise control lever to
position 2 and hold it down until the
desired speed is reached.
̈ Release the cruise control lever.
The new speed is set.
Fine adjustment in 1 mph
(Canada :1 km/h) increments
Faster
̈ Briefly tip the cruise control lever in the
direction of arrow 1.
Slower
̈ Briefly tip the cruise control lever in the
direction of arrow 2.
Warning! G
The speed stored in memory should only be
set again if prevailing road conditions per-
mit. Possible acceleration or deceleration
differences arising from returning to preset
speed could cause an accident and/or seri-
ous injury to you and others.
i
Depressing the accelerator pedal does
not deactivate cruise control. After
brief acceleration (e.g. for passing),
cruise control will resume the last
speed set.
i
Vehicles with automatic transmission:
When you use the cruise control lever
to decelerate, the transmission will au-
tomatically downshift if the engine’s
braking power does not brake the vehi-
cle sufficiently.
S203 MY03_A.book Page 192 Tuesday, January 28, 2003 2:22 PM