Mazda MX-8 Automobile User Manual


 
2-38
Essential Safety Equipment
SRS Air Bags
Form No. 8R65-EA-03C
Constant Monitoring
The following components of the air bag
systems are monitored by a diagnostic
system:
SAS unit
Front air bag sensor
Air bag modules
Side and curtain air bag crash sensor
Front seat belt pretensioners
Related wiring
Drivers seat slide position sensor
Front seat belt buckle switches
A diagnostic module continuously
monitors the systems readiness. This
begins when the ignition switch is turned
to the ON position and continues while
the vehicle is being driven.
Air Bag/Front Seat Belt
Pretensioner System Warning
Light
If the air bag/front seat belt pretensioner
system is OK, the warning light comes on
when the ignition switch is turned to the
ON position or after the engine is cranked.
After about 6 seconds it goes out.
A system malfunction is indicated when
the warning light constantly flashes, stays
on or doesnt come on at all when the
ignition switch is turned to the ON
position. If any of these occur, consult an
Authorized Mazda Dealer as soon as
possible. The system may not work in an
accident.
Maintenance
The air bag systems do not require regular
maintenance. But if any of the following
occurs, take your vehicle to an Authorized
Mazda Dealer as soon as possible:
The air bag system warning light
flashes.
The air bag system warning light stays
on.
The air bag system warning light stays
off when the ignition switch is turned
to the ON position.
The air bags inflate.
Self-Servicing the Air Bag/
Pretensioner Systems:
Self-servicing or tampering with the
systems is dangerous. An air bag/
pretensioner could accidentally
activate or become disabled. This
could cause serious injuries. Never
tamper with the systems and always
have an Authorized Mazda Dealer
perform all servicing and repairs.
WARNING
J60E_8R65-EA-03C_Edition2.book Page 38 Saturday, April 26, 2003 1:48 PM