Mazda 2009 CX-9 Automobile User Manual


 
Black plate (21,1)
1. Adjust the seat to the desired position.
For each seat position adjustment
method, refer to the following pages:
Seat Slide (page 2-5)
Seat Recline (page 2-6)
Height Adjustment (page 2-6)
2. Press and hold the unlock button on the
advanced key/retractable type key
while pressing the set button until a
beep sound is heard.
The advanced key/retractable type key
is programmed after a beep sound is
heard.
Seat position activation
With the ignition switch in the LOCK
position, unlock the doors using any of
the following methods and open the
driver's door within about 40 seconds to
set the driver's seat to a pre-programmed
position.
l
Press the unlock switch on the
advanced key/retractable type key.
l
Press the request switch on a front door
or liftgate while the advanced key is
being carried.
NOTE
If any of the following occurs, the seat position
activation function cancels:
l
Press the lock/unlock button while the key
is not inserted into the ignition switch.
l
A seat adjustment switch is operated.
l
The vehicle moves or starts to move.
l
The selected programming button 1, 2, or 3
or the set button is pressed again.
l
Press the request switch on a front door or
liftgate while the advanced key is being
carried.
l
The set switch is pressed.
Erasing memory
After the following conditions have been
met, press the lock button on the
advanced key/retractable type key while
pressing the set button until a beep sound
is heard.
l
The ignition switch is in the LOCK
position
(The auxiliary key/retractable type key
is removed from the ignition switch)
l
The driver's door is open
NOTE
Memory will also be erased if any of the
following operations are performed:
l
The advanced key/retractable type key code
has been changed.
Refer to Immobilizer System (with
Advanced Key) on page 3-50.
Refer to Immobilizer System (without
Advanced Key) on page 3-53.
Refer to Immobilizer System on page 3-53.
l
The vehicle battery is disconnected for
vehicle maintenance or other reasons.
qLumbar Support Adjustment
(Driver's Seat)
Manually operated
To increase the seat firmness, pull the
lever forward. Push the lever backward to
decrease firmness.
Essential SafetyEquipment
Seats
2-9
CX-9_8Z66-EA-08F_Edition1 Page21
Thursday, May 29 2008 10:7 AM
Form No.8Z66-EA-08F