Filter
Top Products
Black plate (48,1)
4. Push the child-restraint system firmly
into the vehicle seat. Be sure the belt
retracts as snugly as possible. Clicking
from the retractor will be heard during
retraction if the system is in the
automatic locking mode. If the belt
does not lock the seat down tight,
repeat this step.
NOTE
Inspect this function before each use of the
child-restraint system. You should not be able
to pull the shoulder belt out of the retractor
while the system is in the automatic locking
mode. When you remove the child-restraint
system, be sure the belt fully retracts to return
the system to emergency locking mode before
occupants use the seat belts.
5. If your child-restraint system requires
the use of a tether strap, refer to the
manufacturer's instructions to hook and
tighten the tether strap after raising the
head restraint (5-Door/Sport Wagon).
Anchor bracket location (Sedan)
Tether strap position (Sedan)
Anchor bracket
Tether
strap
Anchor bracket location (5-Door/Sport
Wagon)
2-34
Essential SafetyEquipment
Child Restraint
Mazda6_8X47-EA-07G_Edition1 Page48
Tuesday, May 29 2007 3:42 PM
Form No.8X47-EA-07G