Filter
Top Products
Black plate (148,1)
3. Press the SET/COAST button and
release it at the speed you want.
Release the accelerator at the same
time.
Don't continue to hold in the button. Until
you release it, speed will conti nue to drop
(unless you continue to accelerate) and
you'll miss the desired speed.
NOTE
l
The SET function can't be activated until
about 2 seconds after the ON/OFF switch
has been engaged.
l
On a steep grade, the vehicle may
momentarily slow down going up or speed
up while going down.
l
Cruise control will turn off if vehicle speed
drops below 30 km/h (19 mph) when cruise
is activated, such as when climbing a steep
grade.
qTo Increase Cruising Speed
Follow either of these procedures.
To increase speed using cruise control
switch
Press the RES/ACCEL button and hold it.
Your vehicle will accelerate.
Release the button at the speed you want.
Your vehicle has a tap-up feature that
allows you to increase your current speed
in increments of 1.6 km/h (1 mph) by a
momentary tap of the RES/ACCEL
button. Multiple taps will increase your
vehicle speed 1.6 km/h (1 mph) for each
tap.
5-20
Driving YourMazda
Starting and Driving
Mazda6_8X47-EA-07G_Edition1 Page148
Tuesday, May 29 2007 3:43 PM
Form No.8X47-EA-07G