Magnadyne M1-NAV GPS Receiver User Manual


 
13
Destinations Menu
(Continued)
Action Button:
When you have specified an address, press the
Action button to select from the following com-
mands.
Set as Origin:
Lets you designate the select-
ed location as the route origin. You would use
this command when calculating a route from
a point other than your current location.
Show on Map:
Lets you see the selected
address on the map.
Add to My Favorites:
Lets you add an
address to your list of favorite locations.
Recent Locations:
The Recent Locations screen lets you select an existing destination from a list of destinations that you
have previously traveled to. The navigation system automatically stores the last 64 destination in memory.
As each new route is added to the top of the list, the older destinations at the bottom are erased. To navi-
gate to a recent destination follow the instructions below:
1. Press the Recent Locations button.
2. Use the or buttons to the recent loca-
tion. Press the Next button to confirm your
selection.
3. Select either the Quick or Short button to
calculate your route.
Note: The Quick option selects the route that
takes the least amount of time. Quick is the
default setting.
The Short option selects the route that is the
shorter distance. Remember, the shorter route
may not always be the quickest, as you are able
to travel faster on some roads than on others.
Address: (continued)
M1-NAV 8/4/08 1:40 PM Page 13