Filter
Top Products
8
Chapter
RV9490T-LMB User Manual www.magellangps.com
51
Vehicle Profile
Set your vehicle profile so that when routes
are being calculated you will not be routed
over roads that your vehicle cannot travel on.
Note: Vehicle Mode must be set to RV for
routing to consider Vehicle Profile.
Accessing Vehicle Profile
1. From the Map screen tap Menu.
2. Tap the Vehicle Profile icon.
3. You can choose not to use the
Vehicle Profile by unchecking the
box on the Vehicle Profile screen.
Set Vehicle Mode
If Vehicle Mode is set to RV, the Vehicle
Profile (size, weight, and Hazmat
information) will be used in route
planning.
When Vehicle Mode is set to Car, the
Vehicle Profile information is ignored.
Units of Measure
Units are set in Settings > General > Units
1. When set to Miles, profile is set in
feet, inches and in tons, pounds.
2. When Units are set to km, profile is
displayed/set in m, cm, and kg
Set Vehicle Height
1. Access the Vehicle Profile screen.
2. Tap the Height button.
3. Enter your vehicle height.
Set Vehicle Width
1. Access the Vehicle Profile screen.
2. Tap the Width button.
3. Enter your vehicle width.
Set Vehicle Weight
1. Access the Vehicle Profile screen.
2. Tap the Weight button.
3. Enter your vehicle weight.
Set Vehicle Total Length
1. Access the Vehicle Profile screen.
2. Tap the Total Length button.
3. Enter your vehicle total length.
Set Vehicle Type
1. Access the Vehicle Profile screen.
2. Tap the Vehicle Type button.
3. Select from available choices.
Set Hazmat Type
1. Access the Vehicle Profile screen.
2. Tap the Hazmat Type button.
3. Select from available choices (as
applicable).