Filter
Top Products
4
Screen command: changes the contrast or brightness of the display.
Software Info command: shows the product name and software version
of the unit's operating system software, as well as copyright notices.
Advanced Mode command: used to switch to Advanced Mode operation.
Pages
Easy Mode has three Page displays that represent the three major
operating modes. They are the Satellite Status Page, the Navigation
Page and the Map Page. They are accessed by pressing the
PAGES key,
which cycles among them.
Navigation Page
This Page has a compass rose. It shows your direction of travel and the
direction to a recalled waypoint. The navigation screen looks like the
one in the following image when you're not navigating to a waypoint or
other destination. Your position is shown by an arrow in the center of
the screen. Your trail history, or path you've taken, is depicted by the
line extending from the arrow.
The Navigation Page looks like this when iFINDER is not navigating.
When navigating to a waypoint or following a route, the Navigation
screen looks like the one shown in the following image.
Compass
rose
Navigation
information
display
Present position
arrow
Trail line