Filter
Top Products
8
selected. Once that happens, if you press
FIND the Find Menu will pop
up with an extra option at the top of the list:
SELECTED ITEM. Press ENT to
see the Waypoint Information screen for the selected item.
Set Home Waypoint
A waypoint is simply an electronic "address," based on the latitude and
longitude of a position on the earth. Easy Mode allows you to save two
waypoints (Home and Man Overboard). To save a Home Waypoint: 1.
Press and release
ENT. 2. The SAVE AS HOME WAYPOINT? menu appears,
with
YES highlighted. To accept yes, press ENT. The waypoint appears
on the map as an X, named "Home."
Save Home Waypoint menu, left. At right, Home waypoint, with X
symbol and name. When selected by the cursor, the pop-up box appears.
The example shows waypoint set at the cursor location. If cursor was
not active, the point would be placed at the current position.
Caution:
Saving a new "Home" waypoint will overwrite and erase the
previous "Home" waypoint.
Navigate Back Home
This command will automatically take you back to the "Home"
waypoint you created.
1. Press
FIND|ENT; then follow navigation arrows on the Map Page or
the compass rose on the Navigation Page.
To stop navigating to the waypoint, use the Cancel Navigation command.
Pop-up box