Filter
Top Products
52
3. Press
↓ → to ACTIVE|ENT. This unchecks the Active option.
4. To return to the previous page, press
EXIT|EXIT|EXIT|EXIT. As you left the
Edit Trail menu, you will notice that a new trail was started with a new se-
quential number. In the example below, the new trail is number 15, showing
zero points. Note that Trail 14 is inactive, but it is still visible on the map.
A new trail, Trail 15, is created when Trail 14 is set to inactive. Any
new travel will be recorded on this trail, which is active and visible.
Trails do not need to be visible in order to be active.
You can save and recall up to 10 different plot trails, which can also be cop-
ied to your MMC for archiving or for transfer to your MapCreate software.
Tip:
Another quick way to stop recording one trail and begin a new one is to
use the New Trail command: Press
MENU|MENU|↓ to MY TRAILS|ENT|ENT.
Caution:
You also have the option of completely turning off trail recording,
under the trail Options command. If, however, the Update Active
Trail option is left turned off, it will cancel the automatic trail crea-
tion feature.
Displaying a Saved Trail
The active trail is automatically displayed on the map (the "Visible"
option) with the factory default settings. You can selectively turn trail
display off and on for any saved or active trail. In the Saved Trails List,
visible trails have a check mark in front of the trail name.
To turn off trail display:
1. Press
MENU|MENU|↓ to MY TRAILS|ENT.
2. Press
↓ to enter the Saved Trail list, then use ↑ or ↓ to select the de-
sired Trail Name|
ENT.
3. Press
↓ → to ACTIVE|↓ to VISIBLE|ENT. To return to the previous page,
press
EXIT|EXIT|EXIT|EXIT.