Lowrance electronic 10770001 GPS Receiver User Manual


 
86 |
Radar | Lowrance HDS Gen2 Touch
Dening an EBL/VRM marker
1. Ensure that the cursor is not active on the radar page
2. Tap EBL/VRM on the radar menu
3. Select an EBL/VRM.
4. Tap adjust to select EBL/VRM position
5. Drag the EBL/VRM into the desired location
6. Tap Save EBL/VRM
Quick EBL/VRM marker positioning by using the cursor
1. Tap the radar page to position the cursor
2. Tap Place EBL/VRM1 or EBL/VRM2
- The EBL line and the VRM circle will be positioned ac-
cording to the cursor position
3.
Tap the EBL/VRM menu button again to reposition the EBL/VRM.
EBL/VRM settings
Adjust
Tap Adjust and drag your finger in any direction on the screen to
resize the VRM and change the location of the EBL.
Set oset
Used to change the PPI center of the EBL/VRM. Tap Set offset and
tap the desired location on the screen.
Data box
Turns on/off onscreen EBL/VRM information box.
Setting a guard zone around your vessel
A guard zone is an area (either circular or a sector) that you can
define on the radar image. When activated, an alarm will alert you
when a radar target enters or exits the zone.