Filter
Top Products
68 | | PB
Video | Lowrance HDS Gen2 Touch Video | Lowrance HDS Gen2 Touch
Using Video (9” and 12” units only)
The video function allows you to view videos or camera sources on
your unit’s screen.
For information about how to connect the camera, see the separate
Installation manual.
Tap the Video icon on the homescreen to access the Video page.
¼ Note: The video images will not be shared via the network. You can
only view the video on the unit connected to the video source.
The video page
The video image will be proportionally scaled to fit onto the video
screen. Area not covered by the image will be colored black.
Setting up the video page
Adjusting the video image
You can optimize the video display by adjusting the video image
settings. Default for all settings: 50%.
Mirroring the video image
Video input can be set to display a mirrored image. This setting can
be helpful for rear-facing cameras used to back-down the vessel.
The video standard
This unit supports NTSC and PAL video. Check the local video
standard or the standard of your cameras.
11