Filter
Top Products
C-1
ACCESSORIES
C-1
There are no factory installed options. The DC TIG
Starter comes complete with cables, torch adapters,
and hardware for installation.
Field Installed Options/Accessories:
Cable Plugs:
Cable Plug Kit for 1/0-2/0- cable (K852-
70): Attaches to welding cable to provide quick dis-
connect from machine. NOTE: A 17” 1/0 cable with
two K852-70 plugs installed is included with the DC
TIG Starter kit for use in installing the kit beneath the
Invertec.
Remote Control:
K963 Hand Amptrol or K870 Foot Amptrol
can be
used with the DC TIG Starter kit for full-range remote
current control and arc starting/stopping control.
K814 Arc Start Switch
can be used with the DC TIG
Starter kit for arc starting/stopping control.
INVERTEC DC TIG STARTER