80GPS1200+
Reference Station
9. CONFIGURE Set NET Port
<User: Server>
Configure the NET port number and access control.
10. CONT (F1) to return to CONFIGURE Remote Interfaces.
11. Is Remote displayed in the column Interface for the selected NET port?
•If yes, continue with step 13.
•If no, continue with step 12.
12. USE (F6) and YES (F6) to close other interfaces configured on this port.
13. Press CONT (F1) twice to return to GPS1200+ Main Menu.
)
The receiver is ready to accept an incoming call from a remote application.
14. Connect the receivers RJ45 connector NET to a LAN using a suitable
network cable.
Step Description