Filter
Top Products
60GPS1200+
Operation
3.7 Operation with a Typical Configuration Set
)
The example given is for static operations.
Static operations
step-by-step
Step Description
1. Set up the equipment.
)
Always fill out a field record sheet for each point.
)
It is vital that the antenna height is measured correctly. Measure the height
at the beginning and at the end of the occupation.
)
The Satellite Settings of the GX1230+ GNSS accomodates three addi-
tional fields: <GLONASS:> (selection Yes or No), <Galileo:> (selection
Yes or No) and <GPS L5:> (selection Yes or No).
2. Start the Survey application program.
3. SURVEY Survey Begin
<Job: Default>
<Coord System: WGS 1984>
<Codelist: <None>>
<Config Set:> Select a configuration set for static operations.