Filter
Top Products
7
8/15/05
Manual No. 701-055M
Land Pride
Assembly Instructions for 4200/4400 ST & NT (S/N 418339+)
■
Assembly Instructions for
4200/4400 ST & NT (S/N 418339+)
On page 10 is a detailed listing of parts included in this
kit. Use this list as a checklist to inventory parts received.
Tools required:
•
Standard Blade Screwdriver
• Needle Nose Pliers
• Work Gloves
Initial Preparations
1. Park vehicle on a flat surface, move gear shift lever to
neutral, set park brake, turn off engine and remove
ignition key.
Refer to Figure 1B:
2. Raise the cargo box fully up to support it with the Bed
Latch Lock-Up Arm.
Bed Latch Lock-Up Arm
Figure 1B
21173
Bed Latch
Lock-Up Arm
Refer to Figure 2B:
3. Unbolt and remove bed latch lock-down from the
driver’s side of chassis.
Bed Latch Lock-Down
Figure 2B
Rocker Switch Installation
Refer to Figure 3B:
1. Remove panel plug from dump mounting panel by
prying with a straight bladed screwdriver under the
panel plug.
Aux and Dump Panel Plugs
Figure 3B
Bed Latch
Lock-Down
21174
Dump
Mounting
Panel
Panel
Plugs
NOTE: Insert a straight bladed screwdriver under panel
plug as indicated by white arrows to pry panel plug out.
21470
Aux
Mounting
Panel