Kenwood DNX570HD GPS Receiver User Manual


 
8686
Return to the Top page
Bluetooth Operation
Using Hands-Free Unit
Youcanusetelephonefunctionby
connectingtheBluetoothtelephonetothis
unit.
Making a call
1
Press the <TEL> button.
Hands Free screen appears.
NOTE
•When registration of your cell-phone is
completed, the phone book of the cell-phone is
automatically downloaded to this unit.
•Up to 600 phone numbers can be registered for
each registered cell-phone.
•Up to 32 digits can be registered for each
phone number along with up to 50 characters
representing a name. (50 is the number of
alphabetical characters. Fewer characters can be
input depending on the type of characters.)
•Depending on the type of your cell-phone, the
following restrictions are placed;
•The phonebook data cannot be downloaded
normally.
•Characters in the phonebook are garbled.
•To cancel downloading the phonebook data,
operate the cell-phone.
2
Select a dialing method.
See the following table for each method.
Call by entering a phone number
1 Touch [
].
2 Enter a phone number with number keys.
3 Touch [
].
Call using call records
1 Touch [
], [ ], or [ ].
2 Select the phone number from the list.
3 Touch [
].
Call using the phonebook
1 Touch [
].
2 Select the name from the list.*
1
*
2
3 Select the number from the list.
4 Touch [
].
Call using the preset number
1 Touch [Preset #] to start calling the
corresponding phone number.
2 Touch [
].