Kenwood DNX570HD GPS Receiver User Manual


 
127
Return to the Top page
Troubleshooting
Resetting the Unit
Iftheunitortheconnectedunitfailstooperateproperly,resettheunit.
1
Press the <Reset> button.
The unit returns to factory settings.
NOTE
•Disconnect the USB device before pressing the <Reset> button. Pressing the <Reset> button with the USB device
connected can damage the data stored in the USB device. For how to disconnect the USB device, see How to
Play Media (P.13).
•When the unit is turned on after resetting, the Initial SETUP screen appears. See Initial setup (P.11).