Kenwood DNX570HD GPS Receiver User Manual


  Open as PDF
of 143
 
130130
Return to the Top page
Appendix
Connectable iPod/iPhone
Thefollowingmodelscanbeconnectedto
thisunit.
YoucancontrolaniPod/iPhonefromthisunit
byconnectinganiPod/iPhone(commercial
product)withDockconnectorusingan
optionalaccessoryiPodconnectioncable
(KCA-iP202orKCA-iP102).Theword“iPod”
appearinginthismanualindicatestheiPod/
iPhoneconnectedwiththeKCA-iP202or
KCA-iP102(optionalaccessory).
Made for
•iPod nano (7th generation)
•iPod nano (6th generation)
•iPod nano (5th generation)
•iPod nano (4th generation)
•iPod nano (3rd generation)
•iPod with video
•iPod classic
•iPod touch (5th generation)
•iPod touch (4th generation)
•iPod touch (3rd generation)
•iPod touch (2nd generation)
•iPod touch (1st generation)
•iPhone 5
•iPhone 4S
•iPhone 4
•iPhone 3GS
•iPhone 3G
•iPhone
NOTE
•For the conformity information on iPod/iPhone
software,
access www.kenwood.com/cs/ce/ipod/.
•By connecting your iPod/iPhone to this unit with
an optional accessory iPod connection cable
(KCA-iP202 or KCA-iP102), you can supply power
to your iPod/iPhone as well as charge it while
playing music. However, the power of this unit
must be on.
•If you start playback after connecting the iPod,
the music that has been played by the iPod is
played first.
In this case, “Reading” is displayed without
displaying a folder name, etc. Changing the
browse item will display a correct title, etc.
•When the iPod is connected to this unit,
“KENWOOD” or “✓” is displayed on the iPod to
indicate that you cannot operate the iPod.
Usable USB device
Youcanuseamass-storage-classUSBdevice
onthisunit.
Theword“USBdevice”appearinginthis
manualindicatesaflashmemorydeviceand
digitalaudioplayerscanberecognizedas
mass-storage.
■ About file system
The file system should be the one of the following.
•FAT16
•FAT32
NOTE
•When the USB device is connected to this unit, it
can be charged through the USB cable.
•Install the USB device in the place where it will
not affect safe driving.
•You cannot connect a USB device via a USB hub
and Multi Card Reader.
•Take backups of the audio files used with this
unit. The files can be erased depending on the
operating conditions of the USB device.
We shall have no compensation for any damage
arising from any erased data.
•No USB device comes with this unit. You need to
purchase a commercially available USB device.
•When connecting the USB device, usage of the
CA-U1EX (option) is recommended. (However,
maximum supply current of CA-U1EX is 500mA.)
Normal playback is not guaranteed when a cable
other than the USB compatible cable is used.
 previous next