Filter
Top Products
ENGLISH
116
Troubleshooting/error messages
Symptoms Remedies/Causes
iTunes Tagging (KW−NT500HDT)
The song cannot be tagged.
The HD Radio broadcast does not support iTunes Tagging
function or the broadcast does not contain PSD. You can tag
the PSD only when the TAG indicator lights up on the screen.
“Memory Full. Connect iPod.” You are trying to store the 101st PSD in the unit. Transfer
the tagged PSDs to iPod/iPhone or delete all tagged PSDs
from the unit.
“iPod not support tagging.” The connected iPod/iPhone is not compatible with iTunes
Tagging. (☞ page 48)
“Tags transfer failed.” The iPod/iPhone is disconnected during data transfer.
“iPod full. Tags can not be stored.” The memory of the iPod/iPhone is full.
Disc
Disc can be neither recognized nor played back.
Eject the disc forcibly. (☞ page 5)
A disc has got stuck during ejection.
Eject the disc forcibly. (☞ page 5)
• Recordable/Rewritable discs cannot be
played back.
• Tracks on the Recordable/Rewritable discs
cannot be skipped.
• Insert a finalized disc.
• Finalize the discs with the component which you used
for recording. For details about finalizing, refer to the
manual that came with the component.
Playback does not start. • Insert the disc correctly again.
• The format of files is not supported by the unit.
• Record the tracks using a compliant application on the
appropriate discs. (☞ page 53)
• Add appropriate extension codes to the file names.
Takes a long time to start playback of files. The disc has many folders/files/layers. The unit first checks
all the files in the disc. If many files are recorded on the
disc, it may take a long time to start playback.
Sound and pictures are sometimes interrupted
or distorted.
•
Condensation formed inside the unit. Eject the disc and
leave the unit for a while (about an hour) and play again.
• Stop playback while driving on rough roads.
• Change the disc.
• The unit is installed at an angle exceeding 30˚ vertically.
Install the unit at an angle of less than 30˚ vertically.
• Install the unit again firmly.
No playback picture is shown and caution
message about parking brake appears on
the screen, even when the parking brake is
engaged.
Parking brake lead is not connected properly.
(☞ Installation/Connection Manual)
“Read error” • A disc is inserted upside down. Replace the disc.
• A disc has no playable files.