Jeep 2010 Automobile User Manual


 
FLUIDS AND CAPACITIES
Component Fluid, Lubricant, or Genuine Part Capacities
Engine Coolant -
3.7L without rear
heat.
MOPAR
®
Antifreeze/Coolant Five Year
/100,000 Mile Formula HOAT (Hybrid Organic
Additive Technology) or equivalent.
12.7 Quarts (11.8 Liters)
Includes heater and
coolant recovery bottle
filled to MAX level.
Engine Coolant -
3.7L with rear heat.
MOPAR
®
Antifreeze/Coolant Five Year
/100,000 Mile Formula HOAT (Hybrid Organic
Additive Technology) or equivalent.
14 Quarts (13.2 Liters)
Includes heater and
coolant recovery bottle
filled to MAX level.
Engine Coolant -
5.7L without rear
heat.
MOPAR
®
Antifreeze/Coolant Five Year
/100,000 Mile Formula HOAT (Hybrid Organic
Additive Technology) or equivalent.
15.2 Quarts (14.4 Liters)
Includes heater and
coolant recovery bottle
filled to MAX level.
Engine Coolant -
5.7L with rear heat.
MOPAR
®
Antifreeze/Coolant Five Year
/100,000 Mile Formula HOAT (Hybrid Organic
Additive Technology) or equivalent.
16.7 Quarts (15.8 Liters)
Includes heater and
coolant recovery bottle
filled to MAX level.
Engine Oil with
Filter 3.7L
API certified 5W-20 engine oil, Meeting the
requirements of Chrysler Material Standard
MS-6395. Refer to your oil filler cap for correct
SAE grade.
5 Quarts (4.7 Liters)
Engine Oil with
Filter 5.7L
API certified 5W-20 engine oil, meeting the
requirements of Chrysler Material Standard
MS-6395. Refer to your oil filler cap for correct
SAE grade.
7 Quarts (6.6 Liters)
Fuel Selection 5.7L 87 Octane acceptable. 89 recommended for 5.7L. 21 Gallons (79 Liters)
Engine Oil Filter
3.7L, 5.7L
MOPAR
®
Engine Oil Filter or equivalent.
Spark Plug 3.7L ZFR6F–11G (Gap 0.043 in [1.09 mm])
Spark Plug 5.7L LZFR5C–11G (Gap 0.043 in [1.09 mm])
Automatic
Transmission
MOPAR
®
ATF+4
®
Automatic Transmission Fluid
or equivalent licensed ATF+4
®
product.
Transfer Case
(NV140 Single
Speed Only.
MOPAR
®
ATF+4
®
Automatic Transmission Fluid
or equivalent licensed ATF+4
®
product..
Transfer Case
(NV245 Two Speed
Only)
MOPAR
®
NV 247 / 245 Transfer Case Lubricant
or equivalent.
Axle Differential
(Front / Rear)
MOPAR
®
Synthetic Gear & Axle Lubricant SAE
75W–140 (API–GL5) or equivalent with Friction
Modifier Additive.
Brake Master
Cylinder
MOPAR
®
DOT 3 and SAE J1703 should be used
or equivalent. If DOT 3 is not available, then DOT
4 is acceptable. Use only recommended brake
fluids.
Power Steering
Reservoir
This system requires the use of MOPAR
®
Hydraulic System Power Steering Fluid or
equivalent, Which meets Chrysler Matreial
Standard MS–10838.
59
MAINTAINING YOUR VEHICLE