Jeep 2010 Automobile User Manual


 
WARNING!
Persons who are unable to feel pain to the skin because of advanced age, chronic
illness, diabetes, spinal cord injury, medication, alcohol use, exhaustion or other
physical condition must exercise care when using the seat heater. It may cause
burns even at low temperatures, especially if used for long periods of time.
Do not place anything on the seat that insulates against heat, such as a blanket or
cushion. This may cause the seat heater to overheat. Sitting in a seat that has
been overheated could cause serious burns due to the increased surface
temperature of the seat.
CAUTION!
Repeated overheating of the seat could damage the heating element and/or degrade
the material of the seat.
Memory Seats
The memory seat feature allows you to save
two different driver seating positions, driver's
outside mirror, adjustable brake and
accelerator pedals, and radio station preset
settings. The memory seat switch is located
on the driver's door panel.
Adjust all memory profile settings, press the
SET button then press 1 or 2 within five
seconds.
To program a Key Fob to the memory position, press and release the LOCK button within
10 seconds on the Key Fob to be programmed.
Place the ignition switch in the ON position, select Remote Linked to Memory in the
Electronic Vehicle Information Center (EVIC) and enter Yes.
Press 1 or 2 to recall the saved positions, or press UNLOCK on the programmed Key Fob.
Refer to the Owner's Manual on the DVD for further details.
GETTING STARTED
12