Jeep 2010 Automobile User Manual


 
TURN SIGNAL/LIGHTS LEVER
Headlights/Parking Lights
Rotate the end of the lever to the first detent for parking lights , the second detent
for headlights
and the third detent for AUTO.
When set to AUTO, the system automatically turns the headlights on or off based on
ambient light levels.
SmartBeams™
Automatically controls the use of the headlight high beams.
Instrument Panel Dimmer
Rotate the center portion of the lever to the extreme bottom position to fully dim the
instrument panel lights and prevent the interior lights from illuminating when a door is
opened.
Rotate the center portion of the lever up to increase the brightness of the instrument
panel lights when the parking lights or headlights are on.
Rotate the center portion of the lever upward to the next detent position to brighten the
odometer and radio controls when the parking lights or headlights are on.
Rotate the center portion of the lever upward to the last detent to turn on the interior
lighting.
Flash To Pass
Pull the lever toward you to activate the high beams. The high beams will remain on until
the lever is released.
High Beam Operation
Push the lever forward to activate the high beams.
NOTE: For safe driving, turn off high beams when oncoming traffic is present to prevent
headlight glare and as a courtesy to other motorists.
17
OPERATING YOUR VEHICLE