Jeep 2010 Automobile User Manual


 
NOTE: uconnect™ phone and Voice Recognition are vehicle options which must be
ordered separately. The buttons on the radio will only be active if the vehicle has been
equipped with the option.
The radio sales code is located on the lower right side of the radio faceplate.
Unless otherwise noted, the information provided on the operation and functionality of
the radios in this section is common to all non-touch-screen radios.
Seek Up/Down Buttons
Press and release to search for and stop at the next listenable station in AM/FM mode.
Holding either button will bypass stations without stopping.
Audio Settings
Press the TUNE/SCROLL control knob and BASS, MID, TREBLE, BALANCE and FADE will
display. Rotate the TUNE/SCROLL control knob to select the desired setting.
Auxiliary Mode
The auxiliary (AUX) jack allows a portable device, such as an MP3 player or a cassette
player, to be plugged into the radio and utilize the vehicle’s audio system and play
through the vehicle speakers.
Clock Setting
Press and hold the TIME button until the hours blink; turn the TUNE/SCROLL control
knob to set the hours.
Press the TUNE/SCROLL control knob until the minutes begin to blink; turn the
TUNE/SCROLL control knob to set the minutes.
Press the TUNE/SCROLL control knob to save the time change.
To exit, press any button/knob or wait five seconds.
Station Presets
Press the SET/RND button once and SET 1 will show in the display. Then select the button
(1–6).
A second station may be added to each push button. Press the SET/RND button twice and
SET 2 will show in the display, then select button (1–6).
ELECTRONICS
26