Jeep 2010 Automobile User Manual


 
NOTE: uconnect™ phone and Voice Recognition are vehicle options which must be
ordered separately. The buttons on the radio will only be active if the vehicle has been
equipped with the option.
The radio sales code is located on the lower right side of the radio faceplate.
Unless otherwise noted, the information provided on the operation and functionality of
the radios in this section is common to all touch-screen radios.
Seek Up/Down
Press to seek through radio stations in AM, FM, or SAT bands. Seek through tracks in CD
or iPod
®
modes or through songs in the HDD playlist.
Radio Mode
Press the RADIO/MEDIA hard-key to display the different radio modes, then press the
desired soft-key to select AM, FM, SAT, TV, HDD, Disk, Aux or Video Entertainment
System (VES)™ modes.
Auxiliary Mode
The auxiliary (AUX) jack allows a portable device, such as an MP3 player or a cassette
player, to be plugged into the radio and utilize the vehicle’s audio system and play
through the vehicle speakers.
Clock Setting
Turn the radio on, then touch the screen where the time is displayed.
Touch the USER CLOCK soft-key (Navigation radio only).
To adjust the hours, touch either the HOUR FORWARD or HOUR BACKWARD soft-key.
To adjust the minutes, touch either the MINUTE FORWARD or MINUTE BACKWARD
soft-key.
To save the new time setting, touch the screen where the word “Save” is displayed.
Store Radio Presets
Press the RADIO/MEDIA hard-key repeatedly until AM FM SAT is displayed in the upper
left corner of the screen.
Select the radio band by touching either the AM, FM, or SAT soft-key.
Find the station to store by either pressing the SEEK UP/DOWN hard-key, or touching the
SCAN soft-key, DIRECT TUNE soft-key or the left and right arrows.
Once the station is found, touch and hold one of the PRESET soft-keys in the list to the
right, until you hear a confirmation beep.
ELECTRONICS
28