Filter
Top Products
Voice activation 17
Voice command descriptions (continued)
Radio commands (continued)
• RADIO [PLAY] DIRECTORY
Gives a spoken list of station nametags and frequencies
currently stored in the voice system memory.
• RADIO HELP
Gives spoken information about the radio voice commands.
• RADIO MEMORY HELP
Gives spoken information about storing radio presets and
radio nametags.
Cassette tape player commands
If there is not a tape loaded, the audio system will display an
error and will continue to play the current sound system audio.
If the sound system was off with no tape loaded when the
command was given the radio will turn on.
• TAPE PLAY and TAPE ON
Selects the cassette tape player. Any tape currently loaded
will start to play.
• [TAPE] REVERSE
Reverses the direction of the cassette tape being played.
The other side of the tape is played from the current
position of the tape.
•[TAPE] REWIND
Rewinds the tape to the start of the side currently selected.
The current side will then be played. Give the TAPE PLAY
command to stop rewinding and resume play.
•[TAPE] FAST FORWARD
Fast forwards the tape until the end of the side currently
selected. The opposite side will then be selected and played.
Give the TAPE PLAY command to stop fast forward and
resume play.
• TAPE SEEK [UP], TAPE SEEK DOWN
Winds the tape forwards/backwards to the end/beginning of
the current track and then plays.
•[TAPE] DOLBY ON/OFF
Turns the Dolby noise reduction facility on or off. This
command is only available whilst playing a tape.
•TAPEHELP
Gives spoken information about the tape voice commands.