Filter
Top Products
Voice activation 15
Voice command descriptions
In the command descriptions, optional words are shown in
square brackets. Data items that you need to enter, such as
phone numbers, are shown in italics. For information on
entering numbers in commands, see How to say numbers on
page 7.
General commands
•HELP
Gives spoken information about the voice activation system.
•VOICEHELP
Lists all voice command help messages available.
•VOICE MEMORY HELP
Gives spoken information on the use of voice memories.
• VOICE FEEDBACK (ON/OFF)
Turns voice feedback on or off.
• PHONE CONFIRMATION (ON/OFF)
Switches on or off the system confirmation prompt before
making a call when using the PHONE DIAL or PHONE
MEMORY DIAL command.
• VOICE [PLAY] DIRECTORY
Gives a spoken list of voice memories currently trained.
• VOICE DELETE MEMORY (A/B)
Deletes the trained voice stored in memory A or B.
• VOICE DELETE DIRECTORY
Deletes all stored trained voice models.
Radio commands
• RADIO PLAY or RADIO ON
Turns the sound system on and selects the last radio station
to be played.
• RADIO OFF
Turns the sound system off.
• RADIO SEEK [UP], RADIO SEEK DOWN
Seeks up or down the current waveband until the next
station is found.
• (RADIO TUNE/RADIO/TUNE) frequency [FM/AM]
Tunes to the frequency given in the command.
The frequency ranges are:
FM - 87.9 to 107.9 MHz in steps of 0.2 MHz.
AM - 530 to 1710 KHz in steps of 10 KHz
If an invalid frequency is given, the voice system will either
respond with COMMAND NOT RECOGNIZED or will
recognize a similar sounding frequency.