Filter
Top Products
4141
C
O
N
T
R
O
L
L
E
R
7. Cut the cable tie securing the transaxle wiring har-
ness to the rear frame.
8. Cut the cable tie securing the power wiring har-
nesses to the rear frame.
9. Remove the tiller wiring harness from the retain-
ing tab.
10. Remove the wiring harnesses from the scooter.
INSTALLING.
1. Position the tiller wiring harnesses in the retain-
ing tabs.
2. Secure the power wiring harnesses to the rear
frame using NEW cable ties.
3. Secure the transaxle wiring harness to the rear frame
using a NEW cable tie.
4. Connect the RED and BLACK connectors of the
power wiring harnesses to the RED and BLACK
connectors of the controller wiring harnesses.
5. Connect the WHITE connector of the transaxle
assembly wiring harness to the WHITE connec-
tor of the controller wiring harness.
NOTE: Be sure the metal connectors are in the
positions noted in STEP 2 of REMOVAL.
6. Connect the metal connectors of the power wir-
ing harnesses to the metal connectors of the cir-
cuit breaker.
7. Connect the BLUE connector of the tiller wiring
harness to the BLUE connector of the controller
wiring harness.
8. Connect the YELLOW connector of the tiller wir-
ing harness to the YELLOW connector of the
controller wiring harness.
9. Reinstall the rear shroud. Refer to
REMOVING/IN-
STALLING THE REAR SHROUD in PROCEDURE
9 of the Owner’s Manual, part number 1090132.
10. Reinstall the seat. Refer to
REMOVING/IN-
STALLING THE SEAT in PROCEDURE 5 of the
Owner’s Manual, part number 1090132.
CONTROLLER PROCEDURE 7
Rear Frame
Cable Tie
Cable Tie
Retaining Tabs
Red Connector - Power
Wiring Harness
Red Connector - Controller
Wiring Harness
Black Connectors -
Controller Wiring Harness
Black Connectors - Power
Wiring Harness
Metal Connectors -
Circuit Breaker
Metal Connectors -
Controller Wiring Harness
White Connector -
Transaxle Assembly
Yellow Connectors - Controller
Wiring Harness
Yellow Connectors - Tiller
Wiring Harness
Blue Connectors - Tiller
Wiring Harness
Blue Connectors - Controller
Wiring Harness
White Connector -
Controller Wiring Harness
FIGURE 4 - REMOVING/INSTALLING CONTROLLER HARNESSES - LYNX LX - 3 AND
PANTHER LX - 4
Power Wiring Harness
Tiller Wiring Harness
Transaxle Wiring Harness