Humminbird 898c SI GPS Receiver User Manual


 
76
Snapshot and Recording X-Press™ Menu
Delete All Images
(optional-purchase SD Card, Snapshot and
Recording View only)
Settings: Press the RIGHT Cursor key and follow
screen instructions.
Delete All Images allows you to delete all the images at once. This menu
option is only available when an optional-purchase SD card is installed and
Snapshot and Recording View is on the screen.
Delete Recording
(optional-purchase SD Card, Snapshot and
Recording View only)
Settings: Press the RIGHT Cursor key and follow
screen instructions.
Delete Recording allows you to delete a single sonar recording. This menu
option is only available when an optional-purchase SD card is installed,
Snapshot and Recording View is on the screen, and you have selected a
recording file.
Delete All Recordings
(optional-purchase SD Card, Snapshot and
Recording View only)
Settings: Press the RIGHT Cursor key and follow
screen instructions.
Delete All Recordings allows you to delete all the recordings at once. This
menu option is only available when an optional-purchase SD card is installed
and Snapshot and Recording View is on the screen.
Pings Per Second
(optional-purchase SD Card, Snapshot and
Recording View only)
Settings: 1-10, Auto, Default = Auto
Pings Per Second allows you to specify the ping rate for an active sonar
recording.
NOTE: Pings Per Second is available when an optional-purchase SD card is
installed, Snapshot and Recording View is on the screen, and the control head is
actively recording (not playing back).
Auto is the default setting for Pings Per Second and automatically adjusts
the ping rate for best recording quality. If there is limited memory on your SD
card, you can slow the ping rate by setting the Pings Per Second manually,
but the recording will capture less sonar detail. For maximum performance,
keep the Pings Per Second setting on Auto.
Playback Speed
(optional-purchase SD Card, Snapshot and
Recording View only)
Settings: Record, Rewind1, Rewind2, Slow Play
Reverse, Pause, Slow Play, Normal Play, Fast
Forward1, Fast Forward2, Stop
Playback Speed allows you to specify the playback speed for a sonar
recording from the Snapshot and Recording View. This menu option is only
available when an optional-purchase SD card is installed and Recording
Playback is active.