Filter
Top Products
SKU 02948 For technical questions, please call 1-800-444-3353. Page 9
To Attach the Axle/Tire Assembly to the Springs:
FRAME (A1)
SPRING HANGER
PIN (7)
LOCK NUT (7)
BOLT (7)
SPRING PLATE (A20)
LOCK NUT (8)
SPRING (A10)
AXLE (A8)
U-BOLT (8)
FIGURE C
Align the mounting hole at each end of a Spring (A10) with the mounting holes in
the two Spring Hangers located in one side of the Frame (A1). Secure the Spring
to the side of the Frame, using two Bolts, two Lock Nuts, and two Pins (7). Repeat
this procedure to attach the remaining Spring to the other side of the Frame.
(See Figure C.)
With assistance place the Axle/Tire Assembly under the Frame (A1), with its Axle
(A8) positioned under the center portion of each of the two Springs (A10).
(See Figure C.)
On one end of the Axle (A8) insert two U-Bolts (8) upward, around the Axle and
around the Spring (A10). Insert one Spring Plate (A20) onto the threaded portions
of the two U-Bolts and over the Spring. Then secure the Axle to the Spring, using
four Lock Nuts (8). Repeat this procedure to attach the other end of the Axle to the
remaining Spring. (See Figure C.)
1.
2.
3.